Busy overhauling 2.4 se 2002 Chryler voyager engine and require all torque settings
Hi again,
Is your Serena:
1. auto transmission or conventional shift?
2. 4 wheel drive or Front Drive?
Salamat ulit.
SOURCE: Hello,I am overhauling a 4hf1 engine and need
Main bearings - stage 1-80 Nm; stage 2-100Nm.Big ends-stage 1-22Nm,stage 2 -45Nm.Flywheel/drive plate-55Nm.Crankshaft puley-120Nm.Cil.head as main bearings.Valve clearance - cold - inlet-0.15 , exhaust - 0.25. Timing 6/800 at sea level.Good luck!
Testimonial: "THANKS FOR THE INFORMATION. VERY HELPFULL. KENNETH. "
SOURCE: I NEED TO FIND WHERE THE THERMOSTAT IS ON CHRYSLER
follow top radiator hose to engine where the hose hooks up is where the t-stat is .inside the housing connected to engine
SOURCE: Chrysler voyager 2000 blocked by ''alarm set''
Try disconnecting battery and touching the connector to the terminal 7 or 8 times then reconnect, this should reset the e.c.u.and may cure it.
458 views
Usually answered in minutes!
×