xus LS 400 and locate the power steering pump pulley, fluid reservoir and pump on the upper front driver side of the engine.
2
Connect the pulley remove tool to the front of the power
steering pulley. Brace the arms on the pulley tool on the **** of the
pulley. Connect the metal key in the middle of the pulley tool to the
nut in the middle of the pulley. Connect the power drill to the pulley
tool and pull the trigger to remove the pulley securing nut. Remove the
drive belt and the pulley.
3
Position the drain container under the power steering pump.
Remove the drain plug from the bottom of the pump using the metric
ratchet set. Let the fluid drain from the pump into the drain container.
Replace the drain plug to the bottom of the power steering pump.
4
Remove the securing bolts from the right and left side of the
reservoir and the pump using the metric ratchet set. Pull the pump
upward and disconnect the hose from the bottom of the pump using the
wrench. Pull the pump from the engine compartment.
5
Lower the new power steering pump into the engine
compartment. Reconnect the hose to the bottom of the power steering
pump. Position the new power steering pump onto the engine. Replace the
securing bolts the right and left side of the pump and reservoir.
Tighten the bolts using the metric ratchet set.
6
Replace the power steering pump pulley the opposite way that you removed it. Reconnect the drive belt.
Fill the power steering pump reservoir with fresh power
steering fluid. Start the engine and rotate the steering wheel to
circulate the new power steering fluid. I no i gave you directions on how to remove the whole power steering pump question is the pully loose or are you wanting to just change a belt good luck happy holidays
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you have to remove the head lamp. there are 4 bolts that hold it in. you will have to remove ouyer marker lens first.1 screw on top and pull forward. clips hold lens pretty tight.
×