Question about Honda CRV
This is probably the wear indicators on the brake pads,pull the wheels and take a look.(Toyota also designs the pad wear indicators to work in reverse,so they will continue to squeal louder and louder as the wear increases.)
Posted on Oct 27, 2012
I have a 2012 CRV. There was a tapping noise in the morning when I backed up in my driveway. They told me it was a film formed by moisture when moving my car from a warm garage. They do not do anything. If I want to buy a bad car, I would buy many but not a Honda. The second problem is 50% of the time I cannot take the key out without trying the second time. I did not have these problems for a year until now.
Posted on Oct 22, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: HOWLING NOISES
Did you check your Transmission fluid and your differential fluids make sure there up and I don't know if you checked your rear wheel bearings or not, You can usually tell a wheel bearing when you are driving the car at highway speeds and you go around a corner and it get quite a bit louder Depending on what way you are turning if your turning right and it gets louder it will usually be the right side front or rear. the left usually the left front or back. some cases I have even heard Axles making a Howling Noise. Please let me know what you come up with. And Thanks in advance If I helped you out any. Bear001
Posted on Jun 17, 2008
wheel bearing could sieze how loud is it? can you hear it in the car with the windows down? also jack the car up and wiggle the tire any movement? grab the top and the bottom pull and push diffrent ways any clunk or looseness if not you might be ok for a while once it gets loose or real bad clunk replace it hope this helps please leave good feedback thanks
Posted on Sep 18, 2008
who ever told you its the throw out bearing was wright. its an enclosed bearing so it does not run in any oil. if it only makes noise when it cold or sets for a while its common and dose not warrent taking it to a shop. all there going to tell you is you need a new clutch$$$$witch you do not need.
Posted on Jan 20, 2009
SOURCE: Squealing noise whilst driving
it is the backing plate for your brakes. you need to take it to the shop and make them fix and not charge you. as it is their fault that it happend.
hope this helped
please rate well
If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03
Posted on Mar 06, 2009
this happens alot on older vehicles most often times because the coolant hose shrink and expand around a fitting. try and tighten all coolant clamps. this often is all it takes to solve the problem. you should also look to see that all seals around heads of engine show no seepage
Posted on Apr 25, 2009
Tips for a great answer:
Mar 14, 2016 | Cars & Trucks
Dec 20, 2012 | Cars & Trucks
Jun 29, 2017 | 2006 Honda CR-V
Feb 15, 2011 | 1999 Honda Accord
Feb 12, 2011 | 1991 Honda Accord
Dec 09, 2010 | Honda Accord Cars & Trucks
Nov 07, 2010 | 2002 Toyota ECHO
Apr 27, 2010 | 1998 Plymouth Neon
Sep 23, 2009 | 1997 Honda Accord
3,537 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: