2001 chevy tracker 2.5 v6 serpentine belt change

SOURCE: How do you change a headlamp on a 2001 chevy tracker

there is a cover on the backside of these just pull of or twist off then replace the headlamp/ Please rate my response thank you very much

Mike Butler

• 6674 Answers
• Posted on Oct 06, 2009

SOURCE: I need the Diagram of a serpentine belt on 2001

With AC, I hope.

Testimonial: "Thanks so much! I had a difficult time finding this diagram. Will be replacing it when we do the waterpump in a few days. "

SOURCE: how do i change the serpentine belt on my 1999

First, keep this diagram around as you will need it to route the serpentine belt when you reinstall it. There may also be a diagram under the hood by the radiator.
Next, follow this link and watch the video that shows you how to replace a serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

SOURCE: What do I loosen to release and add tension on the

There is a belt tensioning pulley. It's spring loaded and if you put a wrench on the center nut you should be able to remove the tension on the belt...

Testimonial: "Problem solved and thanks!"

SOURCE: How do I change a serpentine belt on a 2001 Chevy

First - note the routing decal on the underside of the hood. If there is no decal, draw a diagram before removing the old one. Move the tensioner using a breaker bar (if there is a hole for it) or a wrench. Slide the old belt off the pulleys and put the new one on in the same position.