Looks likeno one even read your question man... im looking for the same part... and ive read its nearly impossible to find without going to the dealer... and then its 530.00 bucks per side... personally i think im just going to swap out the front end for a chevy s10... bolts right up for a third the price...
SOURCE: Isuzu 96 hombre,how to change the altenator
try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: 1998 Isuzu Hombre heater works sometimes, sometimes doesn't
Sounnds like a thermostat sticking open at times, or, the temperature regulator inside the vehicle is malfunctioning.
SOURCE: 1998 Isuzu. no fuel flow. Any other possibility
It could be the fuse for the fuel pump or the fuel filter.
SOURCE: press clutch down truck still moves foward
If you've not done anything to your truck, check the Clutch master cylinder under the hood, there is a resivoir that should have brake fluid in it. It usually sits next to the Brake master cylinder & is a smaller unit. If nothing has been done to the system recently, and your fluid is full, either the Clutch Master Cyl. or the Clutch Slave Cy. mounted on the bellhousing of the trans. is defective, or has a leaking connection.
If leaking connection, tighten & bleed the system. Check under the clutch pedal on the floorboard for brake fluid, if you find it, the Clutch Master Cyl is the problem & will need ot be replaced. Otherwise, the Clutch Slave Cyl. will need to be replaced. System has to be bled after replacing either & the Clutch Master Cyl. must be bled before hooking up the lines to the Clutch Slave Cyl.
Good Luck
good luck.
294 views
Usually answered in minutes!
×