I have a 2002 hyundai accent cods p1529 and p0734 are comming up. the car wont do backwards and wont go into high gear it slowly will shift into the other gears soometimes with a ****.
P1529 means nothing more than the TCM (transmission control module) has
requested that the ECM (engine control module) turn on the check engine
lamp.
P0734 basically indicates that your transmission is slipping.
You need to take this car to an authorized repair center for hyundai cars. Replacing the filter and fluid on the transmission might save this transmission but I would be willing to bet that a total transmission rebuild is in order.
Good Luck
I have had my transmission rebuilt twice and continue to get the same codes. Plus the DTC P0722, P0732, P0128. I have really put money into this little car. Can anyone tell me if there is a wiring issue with this car?
it sounds like a tcu problem
Or a speed sensors
×
Ok, thank you. I'm going to drop the pan and do the filter and the shift cyclenoid ... See what happens
10,204 views
Usually answered in minutes!
My sons 2002 had the same problem. When the transmission senses a problem it goes into a "Safe" mode, only letting you use the lower gear(s). Definitely a trip for a tranny rebuild! It fixed ours right up!
my accent gt 2001 have problem with all gears ,this is black point for all hyundai cars
I had the same error codes with my 2002 Accent . After changing the transmission fluid and 3 days of diagnostics later, the Hyundai dealership told me the transmission was bad. They wanted $2600 to fix it, but the car wasn't worth $1400 blue book. New car time!
obd code p0734 car does not shift properly
Hyundai accent 2002 central lock battery us dead what is the
Model??
not shifting in high speed
Do I remove speakers to get to my shocks Hyundai accent 2002 to get to them
P0732, p0733,p0734 not shifting or shifting into 2/3 gear. Change speed
Sensor, still doing ,,, maybe the shift solenoid I should change?
Doesn't go over 15 mph,no reverse...
2005, yea it has 3 incorrect gear codes ... Idk speed sensor didn't work, Nore did the neutral safety switch.. So I'm going to a shift cyclenoid if that don't work I'm done!
×