No fan nitro

You have two fans, one to cool the radiator, and one to heat the cabin.

https://www.google.com/search?q=2008+Dodge+Nitro.+How+to+remove+grey+plug+for+resistor+in+fan+shroud

..

the ac fan starts as soon as the ac is switched on
the fan is provide cooling of the condenser before the radiator to prevent high head pressures in the ac compressor
it is the fan at the front of the car mand does not affect engine temp
there is a radiator fan between the engine and the radiator that will not start until the coolant temperature reaches a set temp at which point the ECM switches that fan on
if that fan is not working when the engine is hot , check for fan, coolant temperature sensor switch , fan relay, fuses or problem ECM

No rad fine check the fan is working ,either the fan motor ?? connection to the fan motor ?? fuse ?? relay?? or temperature sensor?? any one of these will cause the fault

the fan have a relay, turn your AC on and check to see if it comes on your fan have 2 speed one is for temp and the other for AC.

http://www.pc4cracked.com/2017/08/platinum-hide-ip-3-5-6-8-license-key

fan should work with AC on so somethings up ,some vehicles tyrn fan on straight away for AC but others use a temperature switch on the AC so it only comes on when stationary so have a good look

First, it would be nice to know WHICH fan you are talking about. The engine cooling fan? The heater-A/C blower fan?

Second, this might be the time to educate you about fuses. Fuses do not cause electrical failures, Electrical failures cause blown fuses.

With that being said, it is highly unlikely that if you find the fuse you are looking for, that it will solve your problem.

that has 2 sensors one ac and one cooling should b a sensor on shroud near cooling fan

hi
1st u have to replace condenser fan and radiator assy , it will solve your problem , cause due to no coolant radiator fan is not working and cause of engine overheating a/c system got trip . replace both condenser fan and radiator and put new coolant. thanks.

Look at the fan radiator switch
Try unplug the CTS,if you see the radiator working continuously
Than the CTS, than change it