Cars & Trucks Logo

Related Topics:

Thomas Wendling Posted on Oct 17, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

When I turn the ignition key I get a light clicking sound from the dash, engine won't turn over. The clicking is not a loud clicking like you get from the starter or a bad ground. Can it be a bad

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 190 Answers
  • Posted on Oct 17, 2012
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Governor:

An expert whose answer got voted for 20 times.

Joined: Sep 26, 2012
Answers
190
Questions
0
Helped
42959
Points
598

THAT'S WHAT I THINK IT IS

5 Related Answers

amjad ajamia

  • 19 Answers
  • Posted on Sep 28, 2011

SOURCE: peugeot 407 will not start!

yes it coud the battery, the possitive and negative cables or the starter solenoid valve

Ad

Anonymous

  • 106 Answers
  • Posted on Jun 04, 2009

SOURCE: 1992 honda accord won't start with ignition key.

Starting solenoid bad?

Anonymous

  • 202 Answers
  • Posted on Mar 30, 2009

SOURCE: What supplies the ground for the starter enable

The below page has all of the information on the pass key, or VATS key system. It has step by step instructions on what you are looking for, and will show you how to bypass the system.

http://vats.likeabigdog.com/

Matthew Boulden

  • 440 Answers
  • Posted on Jun 21, 2009

SOURCE: starter relay clicks when you turn ignition key on

I would think bad starter. Remove it and have it tested to find out. It could also be the starter solenoid gone bad.

Anonymous

  • 179 Answers
  • Posted on Jul 06, 2009

SOURCE: where is the starter relay on a 94 Honda Accord

Yes, it sounds like your solenoid is bad and staying engaged against the flywheel, you could do an amperage draw and a voltage drop test to find out for sure, but you will need an DVOM and a amp clamp. Or you could take it into an auto parts store and they will test it for free. Hope this helps.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Corsica won't start,

Start by checking the battery cables for corrosion at - to motor and + to battery. If all cables are good It will be the starter. the lights dimming while turning the key is normal. PS you can also give the starter a few good whacks with a hammer then try to start it.
0helpful
1answer

Wiring diagram chevy van

Fixed Problem (it was my van) no power to ignition wire at starter. Replaced Ignition lock cylinder. just worn down. (Delivery van 50-60 starts a day). 160k miles.
0helpful
1answer

Clicking sound but engine won't start

This actually does sound like the battery is low on charge. A battery which is quite low on charge will still light the headlights and run many other electrical accessories, but will not engage the starter (which requires much more power than other accessories).
I would start by making sure that an electrical device, such as interior lights, glove box lights, trunk light or something else has not been left on. Then carefully jump start the engine. It is also possible that the battery might need to be replaced for not holding a charge.
2helpful
1answer

MY PLYMOUTH GRAND VOYAGER 'S HEADLIGHT'S AND DASH LIGHTS WORK, BUT THE ENGINE WON'T TURN OVER. THERE IS NO SPARK COMING FROM THE ELECTRICAL WIRES.

When you say no spark, are you talking about the spark plugs, or just the general wiring?

If the engine won't turn over, then it isn't moving, and if it isn't moving then you need to check the following in this order:

1) Does the battery have power i.e. around 12.4 volts or over?No? Charge, test or replace battery.

2) Do the car's head lights dim considerably if turned on when attempting to crank? Yes? Possible lack of battery charge or faulty battery.

3) Assuming the battery is fine, can you turn the dash warning lights on and off with the key? No? Faulty ignition switch.

4) Is there a click sound when you turn the key, but no starter motor spin? Check starter motor connections or replace starter motor.


If none of the above prove to be of help, then please report.
0helpful
1answer

Turns key ignition won't engage 94 Lincoln Town car

Could be a couple different things could be bad starter bad starter solenoid bad neutral safety swich does it make a clicking sound at all when you try to start?
1helpful
1answer

1996 chevy cavalier clicking noise and won't start

have the altanator checked out and the starter
0helpful
2answers

I got a 1999 chevrolet tahoe. when i put the key in the ignition the head lights,and the dash light comes on but it won't even turn. i change the starter and got a new battery and it still won'

well if you have a dvom/voltmeter check the power at the starter terminals. the main terminal should have power all the time the key wire should have power only when the key is turned to crank engine. if you have power at both then i would start looking at grounds
7helpful
1answer

2004 Hyundai Elantra won't start, emergency flashers keep blinking, can't shut off, lights dim, can't jump start, clicking from under dash from relays. What could it be?

The 'Keyless Entry & Burglar Alarm System" is activated. You must 'Disarm' the system using the Keyless Entry Remove (Key Fob) to "Reset" the system. The reason the engine won't start is due to the burglar alarm - it has a "Starter Kill" circuit which is activated when the alarm is activated. The alarm must be DEactivated to DEactivate the 'Starter Kill' circuit.
Another way to start the engine is to get in the car, put the key in the ignition and turn it to 'ON" and wait 3 to 5 minutes until the emergency flashers stop/turn off. Afterward, you should be able to start the engine. NOTE: This does NOT reset the burglar alarm. It will go off again when you enter the vehicle without using the remote/key fob.
1helpful
1answer

I have a 96 pontiac grand am that doesnt start all the time

Starting Problem # 1: Engine Won't Crank At All

Scenario: You turn the key, but nothing happens: And by nothing, we mean there is no dash light, no sound, nada. The first thing you should do in this case is to pop the hood and check the battery. Either the battery is completely dead or there's a wiring problem in the starting system. Try jump-starting the battery. If that doesn't work, you'll probably have to call for assistance.

Scenario: When you turn the key, you hear a rapid clicking sound, and the dash lights dim. This is your classic low-battery symptom. Jump-starting the battery should get the engine to start.However, if you keep experiencing this problem, you could have a bad battery or alternator, or it could be some­thing as simple as a loose alternator belt. Take your car to a mechanic just as soon as you can.

Scenario: When you turn the key, the lights on the dash come on, but you don't hear anything. Make sure you have the shift selector all the way in park. Move it out of park and then back, or try starting it with the shifter in neutral. If your car has a manual transmission, make sure you have the clutch pressed all the way to the floor. If that doesn't help, you can try jump-starting the battery, but it probably won't work. There's a good chance your car has a bad starter or a problem in the starting circuit. That could mean a prob­lem in the ignition switch, neutral safety switch or starter sole­noid.

Scenario: The dash lights come on when you turn the key, and then go right out, and the engine doesn't crank when you turn the key to start, But, the lights slowly come back on when you release the key. This is another classic: the bad battery connection. When you turn the key to start, the starter pulls so much current that it breaks the connection. Then, when you release the key, the connection slowly comes back. The connection provides enough power to turn the dash lights on, but not enough to crank the starter. Cleaning and tightening the battery terminals may fix this prob­lem.

Scenario: When you turn the key, you hear a single, hard clunk. Turn the headlights on and try again. Do the lights dim slightly when you turn the key? If so, you probably have a bad starter or a seized engine. If the headlights don't dim at all, or just barely dim, there may be a connection problem between the starter solenoid and the starter itself.

Scenario: When you turn the key, you hear a loud, scraping or grinding sound like metal on metal. The starter drive is bad, or the ring gear on the flywheel damaged, or both. You may get the starter to engage if you try turning the key a couple of times, but let go of the key right away if you hear the noise again. If the car does start, you should drive it right over to local repair shop and have the problem fixed.

Starting Problem #2: Engine Cranks but It Won't Start

Scenario: The engine seems to crank normally, but the engine doesn't even sound as if it's trying to start. Is there gas in the tank? Gas gauges are notoriously inaccurate. If you have to move your head to one side to get the needle to move off empty, try adding some gas to the tank.

Scenario: When you first turn the key on, you don't hear the fuel pump run. In cars with electronic fuel injection, you should hear a light hum a few seconds from around the fuel tank. That's the electric fuel pump running. If you don't hear the fuel pump run for a couple seconds when you first turn the key on, try cranking the engine until the oil light goes out. That may start the pump running and allow the engine to start.

Scenario: The engine cranks normally, and it sounds like it wants to start, but it won't. You may have flooded the engine. Hold the gas floor and try again. (Let the gas pedal up when it finally starts). If it's raining out, the ignition system may be wet.

Scenario: The engine cranks unevenly in a repetitive-sounding pattern. You may have a bad timing chain or timing belt. Call a tow truck and have it towed to the repair shop.


Starting Problem # 3: Engine Starts but It Shuts Off

Scenario: The engine starts right up, but shuts off as soon as you release the key. This is the classic symptom of a bad ignition switch. A new switch should fix it.

Scenario: The engine starts and runs, but when you put the transmission in gear, the car lurches and the engine shuts off. The converter clutch in the transmission torque converter probably is engaging when it shouldn't. On some cars, you can bypass this by disconnecting the torque converter clutch solenoid; but unless you know which wire to pull, forget about it. Call for assistance.

Scenario: The engine starts and runs, but seems to idle slowly and stalls when you come to a stop. This probably is a fast idle problem. When the engine is cold, it's supposed to idle a little faster than normal to keep the engine running. You may be able to drive using two feet until the engine warms up: one on the gas to hold the idle up a little and the other for the brake. However, don't keep driving it this way. Take your car to your repair shop just as soon as you

Not finding what you are looking for?

638 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...