Question about 1998 Nissan Maxima

1 Answer

I have a 1998 Nissan Maxima GLE, I Failed the Emission Inspection (DTC) Diagnostic Trouble Codes of "P1492","P1105" What these Codes exactly? mean

List of DTC Diagnostic Trouble Codes found on my 1998 Nissan Maxima GLE during OBD test: KOER Result : Fail MIL Command Status : Fail Test Information : DTC Diagnostic Trouble Codes: P0300 Random/Multiple cylinder Misfire Detected P1492 Manufacturer Specific Code P1105 Manufacturer Specific Code WOULD YOU PLEASE GIVE ME THE EXACT READING OF THESE TROUBLE CODES?

Posted by on

  • Wisdom Infini
    Wisdom Infini Oct 17, 2012

    can someone help answer my question please?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 206 Answers

A code P0300 may mean that one or more of the following has happened:

  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective compute
  • P1105MAP/BARO Pressure Switch Solenoid Valve
  • Check and clean the MAP sensor, or replace.
  • P1492EVAP Canister Purge Control/Solenoid Valve (Circuit)
  • Replacing the purge solenoid will clear code P1492 This should also clear code P0300 as well.

Posted on Oct 17, 2012

Testimonial: "Thx a lot this gave me a brighter idea. the problem is the Purge. It went bad cuz I was burning too much fuel."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Code po506 is showing up what does this mean


P0506 - Idle Air Control System RPM Lower Than Expected
This P0506 code is one that's sometimes triggered on vehicles that have electronic throttle control. That is, they don't have a regular throttle cable from the accelerator pedal to the engine. They rely on sensors and electronics to control the throttle. In this case, the P0506 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is lower than the desired (pre-programmed) RPM.

Potential Symptoms: Most likely the only thing you'll notice is the idle speed is lower than normal so it will likely be rougher. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes: A P0506 DTC trouble code may be caused by one or more of the following:
A vacuum leak
An air restriction in the intake air path or exhuast
A faulty positive crankcase ventilation (PCV) valve
Damaged/failed/dirty throttle body
Internal engine problem
Failed PCM

Possible Solutions: This DTC is more of an informational code, so if there are any other codes set, diagnose them first. If there are no other codes, inspect for vacuum leaks, restrictions, and damage. If there are no symptoms other than the DTC itself, just clear the code and see whether it returns.

Other related DTCs: P0507

Hope helps.

Jun 14, 2011 | 2003 Nissan Maxima

1 Answer

Where is the map sensor located at on a 1999 nissan maxima


Problem with map sensor on a 1998 maxima has replace it twice and still get the code p1105. Can't pass emission PLEASE HELP!!

Feb 26, 2010 | 1999 Nissan Maxima

1 Answer

I have a 98 maxima gle/gxe srs light


Did you clean ECU memory from trouble codes? No? DO it!

Dec 01, 2009 | 1998 Nissan Maxima

1 Answer

Nissan quest 1999 engine light codes P0325 & P1105 WHAT DO THESE CODES MEAN


P0325 is for the knock sensor.

P1105 is for the manifold absolute pressure sensor (MAP).

In either case diagnostic tests need to be performed to rule out faulty sensors or if something else is causing the sensors to give the computer inaccurate information.

Sep 02, 2009 | 1999 Nissan Quest

1 Answer

Still starting, but barely.


use a scan tool to check the efi system first!!! then tell me what the trouble codes are! on josephaddyson@yahoo.com

Jun 17, 2009 | 1998 Nissan Maxima

3 Answers

2001 nissan maxima gle crank no start code p1320...please help


Primary ignition fault. Reasons: Bad distributor cap (most likely) or ignition control module/ignition coil.
Hope that helps
Good Luck

Mar 18, 2009 | 2001 Nissan Maxima

1 Answer

Auto Diagnostic Trouble Code


cORRECT. tHIS CODE DOES DEALs With emmissions. P1400 deals with the EGR valve. In case u are not aware, EGR stands for Exhaust Gas Re-circulation. What really this valve does is that it re-cycles some of the exhaust gases into the cylinder for combustion. The EGR valve might be blocked or has malfunctioned. It is advised that this valve changed or consult with a mechanic who is knowledgeable about this technology. a malfunctioned/dis-abled EGR system will cause the car to fail an emissions test, and may cause the EGR passages in the cylinder head and intake manifold to become blocked with carbon deposits, necessitating extensive engine disassembly for cleaning. So it is advised that u repair this ASAP

Jan 19, 2009 | 1997 Nissan Maxima

2 Answers

Engine light is on 1998 maxima gle


Replace the oxygen sensors. The check engine light on a 98 maxima lets you know that there is a problem with the emission system.

Oct 11, 2008 | 1998 Nissan Maxima

Not finding what you are looking for?
1998 Nissan Maxima Logo

1,467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...