Clicking sound when turning ignition to start my 1994 Acura Vigor

Your solenoid sits right next to your starter on the same housing you can check it by removing your starter from your transmission bell housing follow your positive cable from your battery there will be two bolts . this could be a pain in the **** but you can do it. once you have it out you can check it with a set of jumper cables on the ground . connect your neg: cable to the outer housing were the bolt holes are. then touch the pos: cable to the small bolt and the large bolt at the same time. if the starter ingages at a high speed rpm than its ok this means if the gear in front pops out and spins with no problem. when you do this the starter will try to jump dont be frieghtend. hold it for just a few second so you dont burn out the solenoid. if none of this happens then you need a new starter good luck

Hi my car does the same I've never worked on cars before and can't afford to pay someone where do I locate the starter anyone have pics?

Hi there my car is doing the same as his, I changed the starter, brand new n its doing the same. Could it b something else like n egnision switch or could my alarm b messing with it. I would like some help if u can I'd appreciate it.