I have a 99 durango. it makes a grinding noise in the front end. if i just lay my foot on the brake pedal it stops. I have replaced the wheel bearing on both sides and checked the differential bearing and they look to be fine. I cant find the solution to the problem. Can anyone help?

SOURCE: dodge durango 1999 sound front end

The tranny-to-engine bolts being loose can certainly cause this symptom...accordianman

SOURCE: 99 dodge 4x4 truck making a grinding nose in the front end.

How about the u-joints? Could be the ones to the front wheels or the u-joints on the driveshaft.

SOURCE: 1998 Dodge Ram 2500 V-10 2wd

check your tires for rubbing on fender well

SOURCE: noise from front end

Chk. wheel bearings and axel cv joints, and also steering componets and ball joints. Chk. rearend grease.

SOURCE: loud humming noise from front end of Durango 4 x 4

You have a hub/wheel bearing going out. You need to jack up the vehicle on each side. Grab the top and bottom of the wheel and try to move it in/out at the top and bottom. If this does not work then roll the wheel as fast as you can and see if you can hear which one it is. Good Luck.