I found a kit to do this online. However, it seems that the CVT engine 1. Does not have an oil pan to drain and remove, 2. The transmission fluid filter is not the right size (on a CVT engine, I was informed, the Transmission Fluid Filter is built into the Transmission Line).
How do I perform, what should be, this relatively simple service?
SOURCE: How to fill the tranny oil in 97 Audi A4 Quatro
You have to refill it using a small funel through the dipstick hole. Thats how it's been for years. I wish they would think of a way to refill these things in some other way.
SOURCE: fill transmission fluid on 19999 audi a4
LISTEN CLOSE. THERE IS A PLUG ON PAN. REMOVE IT. WITH A SYRINGE TYPE CANISTER YOU NEED TO INJECT THE FLUID INTO IT UNTIL IT STARTS TO COME OUT. THEN CAREFULLY START VEHICLE AND INJECT ANOTHER 3/4 QUART UNLESS IT STARTS TO COME OUT OR EVEN A QUART.LET IT RUN FOR 5 MINUTES THEN CONTINUE TO INSERT UNTIL IT OVERFLOWS AND TIGHTEN THE PLUG BACK TO THE PAN. i WOULD ONLY USE AUDI VOLKSWAGON FLUID AND YES IT CAN RUN $14 TO $18 A LITER
SOURCE: to get to the upper oil pan on a 1999 audi a4
no. suspend engine with engine brace and lower suspension.
SOURCE: Where is the Audi A4, 2006 Multitronic (CVT)
The computer usually sits on the wall next to the driver's legs, but yours could be under the seats, or under the dash, that one I don't know, but it should be kept dry, not under the hood. The valve body is in the transmission. It is accessible from underneath, just under the filter, or on top I should say, holds all your shift solenoids etc.
1,199 views
Usually answered in minutes!
×