Several things could be causing your problem:
Hope you find that this answers your question. Best of luck.
Greg
p.s. If you have the fluid changed, make sure it's done from the tranmission pan, not through the filler tube; siphoning through the filler tube can be hazardous to the transmission, especially cars with a lot of miles
SOURCE: slight miss in engine, hard shift from 1st to 2nd long 2nd gear
Check both O2 sensor(s) and catalytic coverter.. P0420 means catalyst below threshold. Also check the sensor at the transmission and solenoid.
SOURCE: Transmission problem in E230 Benz
What you need to check is the transmission release bearing because if there is a clearance on the release bearing you will encounter this problem and also check the transmission oil.
I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482
SOURCE: 99 Subaru Legacy auto Transmission will not Engage right away P-D
change fluid and filter
Testimonial: "Right on the money!"
SOURCE: Shifting problem
jus re-built my transmission, jus before the gear changes the engine accelerate about 200 rpm
947 views
Usually answered in minutes!
No solution was discussed, just links to Google Chrome and a Manual download
Bill,I don't understand this comment/reply.TD
I am new to this site. I was notified of one solution, but when I try to open the solution, I see only what appear to be links to advertizing. For example, below this comment box, solution #1 is listed. It has nothing but two links; one to Ford, the other to GFChips.
×