On my 1999 Bonneville I need to remove a bolt on the motor mount to get the sewrpentine belt off. Where is the bolt located and what does it look like?
If you look by the crankshaft pulley to the right you will see a tubular looking shaft about 1" diameter , you will notice you can't get the belt out from under this piece , it has a nut on it , once you take the nut off , you will notice it has a star shaped point on the tip of the stud , it requires a reverse torx socket or wrench to remove the stud , when you get the stud out the tube piece it can be removed , then the belt comes off , replace the belt , now comes the tricky part , fitting that tube spacer back into its spot , it can be difficult , once its in place put the stud back in , and put the nut on and tighten it , your pretty much a pro now . thanks.
1,519 views
Usually answered in minutes!
Thanks - I was able to remove the bolt and then replace the serpentine belt. The bolt came out by turning the nut on the end and then aligned correctly on replacement through the motor mount.
Change motor mount on. A 97 pontiac bonneville
1999 Pontiac Bonneville
can't get the serpentine belt off of the pulleys
I want to use 16 inch rims on my 1984 pontiac bonneville
×