Pictures needed
SOURCE: 1983ford mustang ignitionwiring diagram
http://www.autozone.com/az/cds/en_us/0900823d/80/16/71/3c/0900823d8016713c/repairInfoPages.htm
also if you pick a Chilton or haynes service manual they have complete wiring diagrams...
and a lot more info you will find very useful
SOURCE: ignition switch diagram 65 mustang
If its not on the steering column, you can figure it out using an ohmeter on the switch leads. Actually, you could figure out the one on the column that way too! just think about what the switch does in each position and attach wires that do it to the post that does it! IE: starter solenoid wire goes to post that is hot when key is turned all the way to start. Main hotlead is the one that is common to all switch positions. run and accessories is to the post that is hot with key on, accessory only is the one only hot with key turned backwards.
SOURCE: Mustang, 1992 2.3L dual point OBD 1 error codes problem
Have you checked for spark on all 8 plugs? Unplug the exhaust side coil pack and run the engine. Does it run on all 4 cylinders?
678 views
Usually answered in minutes!
×