4 cylinder 1.9L
SOURCE: diagram for serpentine belt for 2002 BMW 525i
An image of a serpentine belt, hope this will help you,
Eitan.
SOURCE: need a diagram for serpentine belt 1998 Ford Contour 4cyl 2.0l.
98 ford contour 2.0 belt routing
here is a picture of routing and how to do it , etc. , good resource ..
J5
SOURCE: need to install belt
i made this with paint. hope it helps. typically on a bmw the belt goes between the water pump and crank pulley to the tensioner; if this is a 99 to 06 ish 3 series and some 5 s you will be good
SOURCE: Serpentine diagram for a 1997 Plymouth Voyager
Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.
SOURCE: I need the diagram for the serpantine belt on a
Click on the following free direct Link. It has the correct Serpentine/Drive Belt Diagrams for your 1997 Ford Windstar with the 3.8L V6 Engine. The Page of Diagrams on the Link also has the 3.0L Engine Diagrams, and included the various engine options (AC, No AC etc.). AND it has additional informational and directional diagrams that will be very helpful to you in the future.
http://www.2carpros.com/car_repair_information/year/1997/make/ford/model/windstar/1997_ford_windstar_drive_belt_routing_diagram.htm
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!
218 views
Usually answered in minutes!
×