How to change abs sensor on nissan almera tino

SOURCE: Nissan Almera Tino Diesel 2.1 - Temperature control not working

Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.

SOURCE: Radio says Secure on Nissan Almera Tino (04)

call a nissan dealership gine them your vin number and they will give u the radio code then u enter it in your radio write it down in ur car somewhere in case it happens again

SOURCE: how to find the heater resistor for a nissan

the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel

SOURCE: how do I remove the service spanner symbol from a

Try this: With the ignition ON but radio OFF, press in and hold the INFO button and turn volume control until the menu appears. Now choose CONFIRMATION and Enter. Go down and select SERVICE and press Enter. Select RESET and then Enter. Backup to the main menu and now turn ignition off. This should remove it.

Colin Stickland

• 22516 Answers
• Posted on Sep 03, 2010

SOURCE: the malfunction indicator light came on, on a

take the malfunction light bulb out ,if it runs ok then leave well alone