Hi there , please help me to understand the problem , no one of services couldn't solve my problem , the transmission make a noise when change the step , from P to D , and from D to R , and after 3 th speed the transmission turning line N I can't understand why the 4 th speed is not working ?? Does have any one this kind of problem ??/
SOURCE: 2001 dodge grand caravan stalls
Glad too hear your making progress, sounds like your dealing with a reasonable shop too. For future reference, take notes when your vehicle acts up. The more information you cn give your technician the easier it is to be fixed. Good luck, let me know how you make out.
R
SOURCE: spark plugs for the back 3 in my 1999 dodge caravan
Hi,
Yes, you are a very intelligent dude, that manifold that you re looking at, is the problem and the solution, this is one of the few problems where the problem is the solution.
Sol: remove the ****** out the way I bet you finish before finishing reading this.
Don't forget the new plenium original gasket from dealer, grease it with anti-sieze qrease, so on the next sparkplug change can be re-used.
Be careful with the electric wire that feed each fuel injectors.
Good hunting dude!!!!
sorry, but the manifold (intake) has to come OUT !!!!!!!!!
SOURCE: Battery replaced on 2001 grand dodge caravan now radio dont work
U will need to enter the radio anti theft code, this lock out was triggered by the loss of voltage to the radio during the battery change, this code is unique to each radio and cam in the owners information packet when the cat was sold new.
SOURCE: 2000 Dodge Caravan transmission issue
have the car scanned for computer codes in the transmission section,most big name auto parts stores will do this for little or no charge, make sure they look for transmission codes. when you get these get back to me and we'll go from there,please rate my fix as i strive to be the best,don't leave negative feedback, just get back to me
SOURCE: transmission input speed sensor location
It is located on the front of the transmission. you will see 2 of them one on the left under small transmission lines it is the input then to the right behind the radiator overflow there is the other one. Easiest way to change them is with a 1" deep well socket
105 views
Usually answered in minutes!
×