We are using AC Delco spark plugs, and the setting is .060. The car is running rough after they were put in.
SOURCE: crossed wired spark plugs
andersonltam: OOPS! Don'tfeel bad it's a common problem. First we have to get you oriented in front of the vehicle and give you some reference points so that we are talking apples and apples OK?
Standing directly in front of you vehicle, hood up and looking at the motor, the engine sits "Transversely" (SIDE WAYS") HMM they keep doing that!
Starting with the cylinders on the front side of the motor closest to the radiator, they are
numbered as followed. To your left is #2 cylinder, the center is # 4 and the right is # 6
So the layout is even on one side and odd on the other.
On the back side you have the same configuration: # 1 cylinder is to your left, # 3 is in the center and # 5 is on the right.
back of car
(1) (3) (5)
2
to #1 cyl > 1 3 <(Dist cap)
6 4
5
( 2) (4) (6)
Front of Car
This illustration was a close as I could get using what I had, but I think you have a 99.9%
chance of figuring it out...... If you don't I'll be watching... Let me know how I did......
SOURCE: spark plug settings
for the most part it under the hood were it tell you what size your engine you can also try this website to see if they have your car listed its www.autozone.com if not call your local part store and tell them the liter of your engine and they can tell you the gap i would also would like to give you this information if you ever need any GM-parts they sell only GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com
SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera
ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.
Testimonial: "Thank you very much for your advice and time!"
159 views
Usually answered in minutes!
×