- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may need the dealership to do it on the next service or get an auto electrician to check the programming. Or try toggling it Off,, turn off ignition and remove the key. Count to 10 and toggle it back on.
Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.
Owner's Manuals are available online for the majority of vehicles manufactured in 2008 or later. If you don't find the manual you are looking for or you have ...
Oil light needs to be reset. If you still have owners manual the reset procedure should be in the manual. If you had you lexus serviced at the dealership just take it back to them and ask them to reset it.
this light can come on even thought service is not actually due. if the service was performed and the light was not on at the time, sometimes you cannot reset them if they are not actually lit, or 99% of the time the technician forgets if the light was not on. stop by your shop and they can reset it for you in just a few moments, and for no charge. good luck!
Try this. Put odometer in milage mode, not trip, if aplicable. Hold down odometer reset botton while turning on ignition. Light should blink a few times and go out. This works on Honda and Toyota maybe Lexus too
PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.
×