Question about 1990 Mercedes-Benz E-Class

Open Question

How do you manuely put down the rear headrests when the button doesnt work in a 1990 mercedes benz 300E class?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ilragatzzo78
  • 241 Answers

SOURCE: 1990 MERCEDES-BENZ E CLASS

yes
Adjusting
Selector lever
Move to position "P" and turn ignition key to position "0".
Ball nipple of cable (40B) Cable
Clip in and insert into holder.
Cable (40B)
Pull jacket in direction of arrow until lock lever (44B) rests against the cam (48).
Ball nipple of cable (40L)
Clip in and insert.
Cable (40L)
Pull jacket in direction of arrow until lock lever (44L) rests against cam (48) and tighten retaining bolt to 5 Nm .

NOTE: The cables are bolted to the steering lock and hooked onto the brake pedal operating lever. They are routed securely to the floor-mounted shift control without kinks.

Testing After Adjustment
Ignition key in position "1" and brake pedal depressed > or = 25 mm :
The locking levers (44B) and (44L) must disengage fully from the cam (48) so that the selector lever handle can be moved to position "N" without resistance. The parking lock is unlocked.
Brake pedal not depressed:
Move selector lever handle from position "N" to position "P" and turn ignition key to position "0": the locking levers (44B) and (44L) must engage in the cam (48). The parking lock is operative. Press on protective cap.
i need your email address to send you an image.
i need the exact model of your car
300e,190e, etc..

Posted on Jun 12, 2008

Ad
ginko
  • 19396 Answers

SOURCE: 1993 Mercedes Benz 300E, right rear squeak

Common causes for High-pitched noise from rear wheels are:

The wheel bearing: this is not usually dangerous in the short term, but I recommend contacting a mechanic and having it fixed. To test the wheel bearing, you lock front wheels, and jack up the car rear and spin the wheel (handbrake unlocked). If bearing is worn you hear a drone. When is the bearing, often car starts vibration above 40 mph.
Noise from bearing can be continuous, intermittent, only when steering, only when hot.

The brake pads: when brake pads are worn out they start making a squealing noise, in this case the noise is only when you brake or continuous. When you jack up the car the wheel may be a little stiff, but not necessarily.When brake pads are completely gone you also hear a scratching noise when braking. Inspect your brakes immediately.

Other suspension problems: Jack up the car as suggested above, check if the wheel has a slight play on the sides. Check all of the suspension components, suspension mounting points, and steering linkage for damage. Also, check the frame rail for wrinkles. It is very important that these components be in good condition, if you notice any problem here, go immediately to a mechanic.

Try doing the simple test above, reinstalling the wheel and working the tire back and forth. This is a common test for bad ball joints and wheel bearings.

Posted on Jul 17, 2008

  • 1619 Answers

SOURCE: power seats don't work on a mercedes benz 300e

most likely dirty switches or bad fuses. Try rotating fuses and then try moving them again. Corrosion on the fuses cause "gremlins" in the system. If not find a junkyard and pull out a set of used switches or try autohausaz.com for new replacements.

Posted on Jul 09, 2009

  • 1 Answer

SOURCE: '87 Mercedes-Benz 300e takes several tries to start in cold

Check cold start valve, and thermal timer switch

Posted on Jan 24, 2010

  • 274 Answers

SOURCE: warning light on mercedes benz 300e year 1989

A Mercedes benz dealer in parts and service should be able to order a manel for you if not,try Auto Zone they have the chelton books that show how to for Mercedes.

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blower fuse located on a 1990 benz 300e


The blower motor fuse is located On the left front shock tower ON USA versions. It is inside a small plastic housing

Jun 26, 2012 | 1990 Mercedes-Benz E-Class

1 Answer

1989 MERCEDES BENZ 300E WHEEL SPEED SENSOR LOCATION


my 1989 mercedes benz 300e engine light flash on and off can any one plz tell me what the problem is my email is rulebaby4@yahoo.com

Oct 28, 2011 | 1989 Mercedes-Benz 300-Class

1 Answer

Warning light on mercedes benz 300e year 1989


A Mercedes benz dealer in parts and service should be able to order a manel for you if not,try Auto Zone they have the chelton books that show how to for Mercedes.

Jul 26, 2010 | 1999 Mercedes-Benz E-Class

1 Answer

My mercedes 1991 300E 2.6 must need the fuel filter replaced What tools are necessary to remove it?


Not sure of what your issue is buy fuel filter is by the fuel pumps under the car rear passenger area under a plastic cover. Some combination wrenches and a good way to stop the flow of gas from both ways and you just swap it out.

May 08, 2010 | 1991 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

How do I take out the back seats in a 1990 benz 300e


Should have release tabs on both sides of seat, pull those then pull up on side (or push tabs in some cases)

Mar 21, 2010 | 1990 Mercedes-Benz E-Class

1 Answer

Trying to remove ignition from a 1990 300E


try this site. I almost guarantee you will find answer in search or by posting.

http://www.peachparts.com/shopforum/index.php

Aug 27, 2009 | 1990 Mercedes-Benz 300 Diesel

3 Answers

LOCATE FUEL FILTER ON 92' MERCEDES 300E


There is an in tank fuel screen where the fuel feed line screws into the bottom of the fuel tank. The is also a convertional fuel filter which is located just in front of the rear wheel on left or right side depending on model. I have a wagon and mine is on the right side. There is a plastic panel that you need to remove with a 10mm socket and a long extention. There are three screws to remove before you can get to the fuel pump/fuel filter area.

May 28, 2009 | 1992 Mercedes-Benz Mercedes Benz 300 Class

1 Answer

Belt


This may be of some help.c8c878b.png

Apr 13, 2009 | 1993 Mercedes-Benz Mercedes Benz 300 Class

Not finding what you are looking for?
1990 Mercedes-Benz E-Class Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...