Replaced the bulbs, but didn't fix problem. Manual doesn't show corresponding fuse. Which fuse should I look at?
SOURCE: mazda 6 reverse lights
ITS POSSIBLE THAT YOUR REVERSE LIGHT SWITCH IS FAULTY BEST WAY TO FIND OUT IS TO DISCONNECT REVERSE SWITCH AT G/BOX & BRIDGE OUT CONNECTIONS WITH IGN ON & IN REVERSE LIGHTS SHOULD GO ON IF THEY DO THEN ITS YOUR SWITCH.
SOURCE: where is the fuse located for reverse lights on a 2005 mazda trib
U most likely need a new backup light switch, it is screwed into the trans case, here is a picture.
SOURCE: reverse lights don't work on
Did you check the fuse yet? The fuse you are looking for is in the passenger compartment fuse panel, in the number 6 position and should be a 10 amp fuse (see picture below) I hope this helps and good luck.
SOURCE: my mazda tribute 2006 is
This is simply letting you know that the vehicles computer system has detected an issue with a sensor relating to the engine. If you go to your local auto parts store, they will usually scan the system for free. If you can do that and let me know what the codes are I will be very happy to point you in the right direcdtion for repair.
2,101 views
Usually answered in minutes!
×