2005 Nissan Almera Tino Logo

Related Topics:

A
Anonymous Posted on Sep 25, 2012

Cannot open almera tino doors or bonnet as battery flat and zappers wont work

No keyholes

5 Related Answers

Anonymous

  • 183 Answers
  • Posted on May 20, 2008

SOURCE: Nissan Almera Tino Right hand side

YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX

Ad

Anonymous

  • 6 Answers
  • Posted on Jun 07, 2009

SOURCE: Nissan Almera Tino Diesel 2.1 - Temperature control not working

Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.

Anonymous

  • 20 Answers
  • Posted on Oct 09, 2009

SOURCE: Radio says Secure on Nissan Almera Tino (04)

call a nissan dealership gine them your vin number and they will give u the radio code then u enter it in your radio write it down in ur car somewhere in case it happens again

Anonymous

  • 426 Answers
  • Posted on Oct 28, 2009

SOURCE: how to find the heater resistor for a nissan

the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel

Anonymous

  • 1 Answer
  • Posted on Feb 14, 2010

SOURCE: how do I remove the service spanner symbol from a

Try this: With the ignition ON but radio OFF, press in and hold the INFO button and turn volume control until the menu appears. Now choose CONFIRMATION and Enter. Go down and select SERVICE and press Enter. Select RESET and then Enter. Backup to the main menu and now turn ignition off. This should remove it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Remote locking problem

Take your car and zapper to a Mercedes dealer to re-synchronize the encryption codes between them.
0helpful
1answer

Central locking fob ok but central locking totally dead

Does the central locking still work when you open with the key. First place to start is a new battery in ur fob even if the lights still coming on
0helpful
1answer

How do you fold the back seats on a nissan tino 2001

You do it from behind. Pull the handles on the LEFT and RIGHT and push up
0helpful
1answer

Heater on nissan almera

That noise is the heater and AC air temperature control electric blend door motor trying to move a duct door that is sticking due to heat warping. You will need to remove the entire dash assembly and replace the blend door. This door is located between the AC core and the heater core and "blends" the air from each (hot from heater core and cold from AC core) to give the desired air temperature,.
0helpful
1answer

Failed emissions test nissan tino

Mine just failed emissions test garage said its burning oil what is the soulution
0helpful
1answer

How do i adjust handbrake on 04 nissan tino dci

How do I adjust the handbrake cable on a Nissan Almere 2004 please
0helpful
1answer

Have replaced the battery on a nissan almera tino and now it won't start. It turns over OK but will not fire.

I changed the battery as it was struggling to start over a few days and then died completely after being left over a weekend. After the replacement all electrics worked but the engine wouldn't turn over, it just clicked. There was no immobiliser warning or messages on the screen. I tried a few of the things on this forum but it turned out to be a broken battery earth cable where it attaches to the gearbox under the car. I removed the cable (easier with the battery tray removed) then had a new lug attached to the end. Total cost 1.50. phew!
0helpful
1answer

Slow Electric window on Nissan Almera Tino 2002.

If you spray silicone in the tracks from the top open window and the speed changes faster I would say the channels are too tight. If no change then the voltage at the motor needs to be checked at 13+ volts. If not then the wiring at the door bend needs to be checked for fraying. If a garage does this job, then they should fix it right. It is not right. You paid for it.
4helpful
2answers

Battery died cant get access micra s 2003

There should be a little plastic cover on the passenger door handle with an emblam of a key on it,underneaththis you should find the keyhole
Not finding what you are looking for?

195 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...