Code p2098 on jeep wrangler - Wrangler Jeep Cars & Trucks

Did you test electrical circuit before replacing ?
P0032 Jeep O2 Sensor 1 1 Heater Circuit High

only reference os far is the wrangle has finished reading fault codes

join this free jeep wrangler forum

lots of good help and information there

Jeep Wrangler Forum Jeep Wrangler Owners Community

If you mean P2098 read on, Po 2098 is not a vaild code, all codes for OBD2 have one letter (P, B, etc.) and four numbers 0-9.
P2098 VOLKSWAGEN - Post Catalyst Fuel Trim System Too Lean Bank 2
Possible causes- Low fuel pressure
- Engine misfire
- Large vacuum leak
- Blocked converter
- Faulty O2 sensor bank 2

Read more: http://engine-codes.com/p2098_volkswagen.html#ixzz2BxcAojuy

check for vacuum leaks or a faulty mass air flow sensor. all the codes have to do with engine too lean(too much air).

P2098 Post Catalyst Fuel Trim System Too Lean (Bank 2) have you used any fuel additive lately? that will toss that code, But basically its a o2 sensor

p2098 is a VACUUM deficiency.

The problem is one of your coil packs is bad. Don't throw money into sensors, they are false codes. The problem is coil packs.

1. check for vaccuum leaks.
2. check for a check engine code
3. check the throttle body/butterfly plate for carbon build up.

P2098 = Post Catalyst Fuel Trim System Too Lean Bank 2

There is a software update for the PCM that addresses this issue. TSB 18-028-06