I have a 1994 Land Rover Discovery V8i, and the fan belt has snapped. I have a replacement, but I need confirmation of which pulleys to place the replacement fan belt round. Thanks for your help.
Hi there,
My brother in law and I changed it without taking anything apart except the fan cover, what you'll need to do is gently use a crobar to release the tensioner pully directly below the alternator, and jam it a bit, then slowly release the old belt, if it's as worn as mine was you'll be fine. Then simply run the new belt starting from the bottom up. There's a great diagram on the weblink below.
http://www.roverparts.com/TechTips/serpentine_belt_routing_D2.cfm
763 views
Usually answered in minutes!
×