Nissan will not go forward, only moves in reverse.

It could be as simple as a shift solenoid but you need to have the transmission checked. It can be diagnosed for about 90 bucks and well worth finding it now then later.

need to have mechanic look at it ,,could be serious.....

The Trans is on it's way out. Your best bet is to get a used one. Usually when they go out that is it they wont move at all.

your transmission is either out of fluid or is damaged beyond functionality-sounds real bad, if it takes reving the car over 6 grand to move it, you need a trans.

Mke sure that the transmission is working. you can tell if the engine rpm changes when you put it gear (forward or reverse) if it does not then you need to check the level of the transmission fluid for an automatic or you may have clutch problems if it is a manual transmission. if you have more details on the transmission type (auto or manual) and if it is doing anything when you try to get it to move that would be helpful.

Sorry, no solution. I have the exact same problem and it started about the time you posted your problem. If anyone offers a suggestion, please let me know too. thx.

I did not solve my problem BUT I do want to get me off your listing.

You advertised a FREE consultation for 7 days but YOU DID NOT HONOR YOUR ADVERTISING.
I ASKED you the same question 3 times AND YOU GET BAC K ASKING ME FOR A CREDIT CARD Nunber
Why do you need a number if it is FREE.....
I DON'T TRUST YOU ADD..
PLEASE ERASE MY EMAIL FROM YOUR RECORDS.
tHANKS, hUGO sILVA

shift linkage needs adjusting,,could be bent, easy fix, located along firewall to fram beneath the column, ask your son wut he ran over and didnt tell u about... hope i could help...:)

What engine? Rear wheel drive ?Sounds like shift linkage or cable out of adjustment slightly. Have a look at where cable or rod attaches to transmission for adjustment. If not sure of what your looking for get back to me with info.

Unfortunately the only thing to do in this case is to open the gearbox and see the real status of the cylinders, it's very possible the cylinders do not make contact anymore.