Seat belt light stays on, but the buzzer stops once the seat belt is engaged???
The weight sensor in the seat is bad if this is the passenger seat. When you connect the seat belt, the sensor is disabled.
SOURCE: My seat belt light stays on.
The contact in your seat belt buckle needs cleaned, (when you click the belt into the buckle the connection is not being completed keeping the dash light on.) Try inserting a thin flat blade screw driver with a lint free cloth dipped in rubbing alcohol into the buckle and slide to and fro gently. do this a few times moving cloth o a clean spot each time till no dirt shows.
SOURCE: seat belt light staying on
There is a small clip with one wire on it at the base of the seat belt where it connects to the floor. It might be broken, or the switch inside the belt clip is faulty. If the wire is fine and connected the belt clip side needs replacing
SOURCE: srs light come on
hi,send your car to dealer to scan the problem,maybe erase fault is require ,or you can found the exact defective part,ty
SOURCE: seat belt light keeps staying on
There is a sensor that makes a connection when the seat belt is buckled, that turn out the light, it is defective, replace the seat belt assembly or remove the bulb.
SOURCE: How to disable the speed linked seat belt buzzer in my 2007 camry
Your dealer will use their scan tool to interface with your vehicle; that will disable the speed link. I provide this service at no charge.
634 views
Usually answered in minutes!
×