Where is this sensor located
The input/turbine speed sensor has nothing to do with the turbo. It is transmission related and is a circuit malfunction. I am having the same problem and it causes my car to downshift into 3rd gear (computer's fail safe gear) on the highway. The sensor is located above the transmission housing, and doesn't require you to take apart the tranny. I am having trouble finding the part number for this and where to buy it. Any help would be nice.
any suggestions on what the sensor looks like and where it is to be exact
im having the same issue on my 02 lancer ES. i got my sensor offline for only $53 including tax. just got it, a week later. trying to locate it to replace it.
Is it hard to change out?
×
Have the same problem with the input speed sensor. The part, so far, is only made by Mitsubishi (Part No. 8651A111) and cost about $110 (w/ tax in TX).
same here in AZ
×
I just ordered my speed sensor offline for $53 including tax and shipping. got it in the mail 5-7 days later. ps- its NOT turbo related..at all.
Intake on the turbo header.
SOURCE: i have a troble code
this input sensor is located on the left side of the trany,heres a diagram to help you loacte it, good luck and hope this helps.
SOURCE: how do I locate the turbine speed sensor on a ford
its on the front of the transmission below the coil it compares the input shaft/turbine speed against the speed of the output sensor it is checking to see how much slip or diffrenece in shaft speeds the only time the two shafts are spinning at the same time is when torque converter is in lockup
get this sensor from ford dealer for a little more than $100 bucks
Part number F32Z7F040A
http://engine-codes.com/p0715_mazda.htmlForum CodePossible causes- Transmission speed sensor circuit is open or shorted.
9,665 views
Usually answered in minutes!
My GF has the same code but It shouldn't be a turbo issue, since our cars dont have turbo
has to do with the transmission...loooking for a manual....
×