I would like to change the knock sensor without haveing to remove the motor and transmission
Http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?fromSearchPage=true&pageId=0900c1528008a1fe&partName=Knock+Sensor&partId=0900c1528008a1fe Here's a link,but it looks as you have no choice,time to roll up the sleeves and get busy,here's how to do it.
SOURCE: Location of knock sensor on 1994 toyota 22vre engine
The Knock sensor on a 22re is located under the intake manifold on the engine block. to the upper left of the oil filter. With is the passenger side of the engine. I believe it is yellow in color. Not do be confused with the oil pressure sensor which is close by. The knock sensor has a larger electrical connector. Good luck it can be hard to get to.
SOURCE: SUNROOF PROBLEM ( TOYOTA PREVIA ) 1991
i need to get a new sunroof fitted in my 95 toyota previa, does anyone know where
SOURCE: 1991 Toyota Previa Dashboard lights
Yeah you can remove the hood and enginge but it's much harder that way! Just kidding the dash is notthat hard to get out one speedo cable and four screws witll get the speedo head out so you can change the bulbs, they are miniture bulbs to.
SOURCE: Need to locate knock sensor on 1999 camry V6. Where is located.
i have toyota windom 4vz-fe i need locate knock sensor
SOURCE: 91 Toyota Previa AWD - Swap original engine for Previa Supercharged engine
I do a lot of work on Toyota Previa before; including rebuilt engine, swapping engine and transmission and lot of things in between, but never swap a normal aspirated engine to a supercharged engine or diesel. Since i have some experience in Previa, I would like to share my opinion with you regarding your plan to swapping the normal aspirated Previa engine to a Supercharged engine. When you do a swapp like that, you will not only be dealing with just swapping engine, but some wiring, computer, throttle body, air cleaner assembly, extra frame and pulley on the accessory items, transmission as well as a right rear end to get the correct gear ratio to accomodate the new engine and transmission. I can go on even more, but let me tell you this, beside less headache, it would definitely cheaper if you were to find a Supercharged Previa and fix it up. However, if you are totally motivated to do this project, keep in mind, this engine swap will be a long term and time consuming project.l I wish you best of luck and have fun!
317 views
Usually answered in minutes!
I would like more info
http://www.autozone.com/autozone/repairi... Here's a link on how to remove the engine,the knock sensor is in the cylinder head and the engine has to come out to get to it.Another way to find out is call dealer and see what it takes to remove the knock sensor.When you call ask for parts department,the guide I sent is from the Haynes repair manual.Always good to get a second oponion.
×