I need a wiring diagram for Honda Jazz 1.4 55 model, electric wing mirror N/S

To fit it you need to pop off the mirror plate itself, remove the (7 I think) screws to access the wing mirror cover clips. Squeeze those to release the cover, remove the cover to expose the indictor unit which can then be unscrewed (2 screws) and the push-on electric plug removed. Reverse for putting back together.

Pretty easy. The hardest part was getting the mirror off gently.

Hope that helps. Unfortunately I didn't take pics, but is really straightforward.

The fuse is in the mirror itself.
https://www.youtube.com/watch?v=c7hhtl1a2sc

Go to Connemera Market, Palayan, Trivandrum. I've seen so many of it there.

How To Install Replace Side View Mirror Honda CR-V 02-06 ...

? 10:31
https://www.youtube.com/watch?v=tuGFzxCVh7k
May 8, 2012 - Uploaded by 1A Auto Parts
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or ...

Replace 2002-2006 Honda CR-V Side Mirror, How to ...

? 14:20
https://www.youtube.com/watch?v=UKLPkZszbrA
Sep 25, 2013 - Uploaded by Go-Parts
Side Mirror purchased from www.Go-Parts.com Links to purchase products: ...

2000 Honda CR-V side mirror replacement - YouTube

your mirror control switch has 9 wires.,your drivers door mirror has 5 wires color coded .from your mirror control switch to your drivers siide mirror / 0.5 black .0.5 brown. 0.5 brown. 0.5 black. 0.5 black.
your passenger mirror wires are 0.5 blue/black .0.5 blue/grey. 0.5 blue/white. the passenger mirror has a ground cable 0.5 brown.
the passenger mirror wire 0.5 green/white connects to a 5amp fuse/F25 onto F31 5amp to a wire 0.75 green/yellow.back to the mirror control switch.

Likely to be the actuator/motor inside that has failed. Order one off eBay that offers returns an find out how to fit it. Should be job done!
If not its likely to be a more serious electrical issue good luck with that..

Do you mean the turn indicator located in the mirror assembly? There is no way to replace that other than to replace the entire mirror assembly. I would be checking the wiring harness to the door before replacing the mirror. There could be a broken wire in the umbilical that goes between the body and the door.

Instructions
1


Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.

2


Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.





3


Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.

4


Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).

5


Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.

6


Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror...
1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.
2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.
3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.
4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).
5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.
6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Hope helps (remember comment and rated this). TY for using Fixya.

your mirror control switch has 9 wires.,your drivers door mirror has 5 wires color coded .from your mirror control switch to your drivers siide mirror / 0.5 black .0.5 brown. 0.5 brown. 0.5 black. 0.5 black.
your passenger mirror wires are 0.5 blue/black .0.5 blue/grey. 0.5 blue/white. the passenger mirror has a ground cable 0.5 brown.
the passenger mirror wire 0.5 green/white connects to a 5amp fuse/F25 onto F31 5amp to a wire 0.75 green/yellow.back to the mirror control switch.