Removing a door panel on a 2007 bmw 335i - 2007 BMW 335i Sedan

SOURCE: window dropped into rear door panel. How do I remove the panel & repair

the window regulator has failed. the door panel has to be removed first which requires removing the trim piece that is on the grab handle (extremely hard to remove without breaking) there are three of four screws that hold the door panel on. once the door panel is off, the vapor barrier has to be removed. don't tear it, it is there for a reason to keep water out of the vehicle. make sure you reseal it properly with window weld. once the vapor barrier is removed you will need to unclip the window glass from the regulator. i typically will take and break the tab that holds the window. once the window is loose, move the glass all the way to the top of the door. now remove the regulator, swap the motor over, and reassembly. i would recommend taking the vehicle to a bmw dealership, around $650 for the complete repair and the dealership will stand behind their repairs

SOURCE: Want to loacate the Brake Fluid reservoir on the BMW 335i Sedan

it should be under the hood on the drivers side up close to the fire wall

SOURCE: need to find fuse box for 2007 335i bmw

One in boot on the right hand around the battery somewhere, one under dash and could also be one under the bonnet, would be over to the left hand side of the vehicle. Not had to touch the electrics on any of these yet but generally thats where they hide.

SOURCE: how can i reset oil change on 2007 bmw 335i twin

I have a 2007 335i convertible.. my low oil light went on.is there a dip stick or something. how do i tell how low iam

SOURCE: What Type of Oil do you use in a BMW 2007 335I coupe?

the answer is 5w-30 synthetic oil only,no other oil is correct. MUST BE SYNTHETIC. hope this helps if you need more help get back to me Please rate my fix Thanks Ray