When I was changing a burned bulb in the visor it popped. From then on the radio, interior lights and alarm stopped working. When the truck is off the alarm won't turn on. None of the accessories will work. I have checked and replaced all fuses, but don't know if relays also need replacing. Any help is appreciated.

All interior lights, alarm and radio are not working

When I was changing a burned bulb in the visor it popped. From then on the radio, interior lights and alarm stopped working. When the truck is off the alarm won't turn on. None of the accessories will work. I have checked and replaced all fuses, but don't know if relays also need replacing. Any help is appreciated.

1 Answer

Chad Watson

Contributor 37 Answers
Posted on Nov 13, 2017

Chad Watson

Contributor

Joined: Aug 02, 2008

Answers

Questions

Helped

23009

Points

Maybe the burned bulb is shorting out to ground?

5 Related Answers

Anonymous

1 Answer
Posted on Oct 04, 2008

SOURCE: power locks interior lights &idle

The same thing happened to me...its a fuse under the hood under the black box.There should be a little yellow thing holding two small fuses...check those ok.

Anonymous

109 Answers
Posted on Dec 02, 2008

SOURCE: Horn won't work on my 1994 Mitsubishi Mighty MAx

the horn relay is located underneath the hood close to the fire wall on the passenger side in a black box with a diagram on it..if the does'nt work try checking the wire under neath the steering wheel cover..

steven martin

117 Answers
Posted on Apr 07, 2009

SOURCE: brake lights wont work

Check the brake light switch which is located above the foot pedals on a metal bracket.

Ned C Cook

3433 Answers
Posted on May 28, 2009

SOURCE: Brake lights not working

Like for like on the bulbs
chk your brale light switch at pedal arm...... good luck

Anonymous

164 Answers
Posted on Jul 21, 2009

SOURCE: 2000 Mitsubishi Eclipse GT horn not working

check the wires to the clip on the horn they rust and then there no connection

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Where is the fuse for the lighted mirror in the sun visors?

should be same fuse for the interior light if the interior lights come on its most likely a burned out bulb

Read full answer

Aug 28, 2012 • 2003 Chevrolet Corvette

0helpful

1answer

How do I change the interior light in a 2002 chrysler sebring

The lens should seperate from the housing. The entire lamp, assembly stays in the roof and only the lens is supposed to pop off for bulb replacement

Read full answer

Aug 21, 2012 • 2002 Chrysler Sebring

3helpful

2answers

The interior lights will not come on when door opens, the visor lamps will NOT light no matter what, radio lights work normally the turn signal lamps blink fast, but all bulbs light

For the turn signal flashing fast - MAKE SURE you have all bulbs flashing that are SUPPOSED to be flashing. The front side marker lamps are part of this equation.

As for the interior (dome and visor) lamps, there is a fuse labeled "CTSY LAMP" in the fuse block. The lamps themselves are controlled by the body control module (BCM). The CTSY LAMP fuse only provides input power to the BCM. I would start with a scan of the BCM to see if it can shed any light (No pun intended) on your problem.

Read full answer

Dec 01, 2010 • 2000 Chevrolet Venture

1helpful

4answers

Need help with blown fuses in mazda rx8 2004. Husband removed the messed up sunvisor and now the radio doesn't work or the display and the map lights and keyless entry/alarm aren't working either. Car...

2003 MPV. Room Fuse would immediately blow when replaced - as a result, no audio, auto doors, interior lights, etc. It would blow without the key in the ignition so I knew it had to be something that operated without the electric being turned on. Started guessing by pulling the fuses for the auto doors then retrying the Room Fuse.. Room Fuse continued to blow. Then went through interior lighting - started taking out bulbs and disconnecting lighting connections trying to isolate the issue.. popped the visor mirrors out and noticed one of the connections had come loose.. reconnected, popped in another Room Fuse, and presto! Everything back to normal - lucky me.

Read full answer

May 24, 2010 • 2004 Mazda RX-8

1helpful

1answer

Years ago, the visor mirror cover on the passenger side, broke off. This is a lighted visor mirror. I was just going to leave it...but it seemed to get hot and I was afraid it would burn the ceiling...

After you pulled out the socket, maybe the positive and negative wires accidentally touched and blew a fuse. First, tape the wires so they can't touch each other. Then, look at the fuse box and see if a fuse is blown. The owners manual or perhaps the fuse box itself will tell you which fuse controls the interior lights.

Read full answer

Jan 01, 2010 • 2001 GMC Jimmy

0helpful

1answer

I have a 1999 pontiac sunfire. the interior lights does not work.( the mirrow reading lights, the 2 side lights by the door wen you opend the door it does not work and the compartament glove light does not...

First check your fuses and bulbs. If they check out OK, there is probably a faulty relay. If the car starts and runs normally, the alarm module is probably OK. A broken wire is possible, but not likely, unless an aftermarket radio or alarm has been installed. One other possibility is a faulty or stuck door jamb switch. If there is a burnt fuse, you will need to find the short that caused it to burn out. Look for corrosion in all of the non-working light bulb sockets.

Read full answer

Dec 19, 2009 • 1999 Pontiac Sunfire

0helpful

2answers

The fuses for the radio and dome lights keep blowing out. I replaced it with a circuit breaker and it completely blew out. How do I fix this?

If they keep blowing there is a issue somewhere check for frayed wires or pinched wires.

Read full answer

Oct 23, 2009 • 1990 Chrysler New Yorker

0helpful

2answers

Window, interior lights, car alarm and fuse keep on burning out

you have a short circuit or burned out wires somewhere, could be anywhere.
Try disconnecting the alarm, taking the bulb out of the interior lights, and putting in the fuse, if it blows again you know that the alarm or interior lights are not at fault, if it stays good replace the bulb and if it blows theres your faulty circuit, if it stays good then the windows are at fault.

Read full answer

Oct 09, 2009 • 2000 Volkswagen Jetta TDI

10helpful

1answer

I have a 2004 mercury mountaineer 4.0 liter. Had to remove the visor to replace so cut wires to visor light to remove and now the power window along with the radio and gas gauge don't work. Need adv

Check fuse 17(15amp) in the interior fuse panel.

Read full answer

Apr 17, 2009 • Mercury Mountaineer Cars & Trucks

5helpful

1answer

Interior light's not working

1999 vw passat, no interior lights , no door lights ,no lights on sun visors no boot light.all lights worked 2 months ago ,they all came on again for about 5 minutes last week,and have not worked since ,every thing else works ok .can you help. thanks PETER

Read full answer

Nov 03, 2008 • 1999 Volkswagen Passat

Not finding what you are looking for?

View Most Popular

2002 Montero Sport

Cars & Trucks

Where is the fuse for the lighted mirror in the sun visors?

2003 Chevrolet Corvette

512 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Top Trucks Report!

View all Fixya Reports

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for 2002 Mitsubishi Montero Sport? Or just drag it here!

Related Topics:

All interior lights, alarm and radio are not working