I cannot turn the key on the driver side door. In order for me to get in I would have to go to the passenger side and unlock it from there. The buttons are find it's the key hole itself that is giving me the problem.
You need to replace the tumbler assembly, a locksmith can set it to work with your old key.
SOURCE: keyless entry and door locks
Do you have he owners manual? instructions are in there for the keyless entry system. If not go to this link:
http://www.motorcraftservice.com/pubs/content/~WOTEXP/~MUS~LEN/41/96expog1e.pdf
SOURCE: locks not working properly
been there ------open up the rubber connector between the drivers door and the body [by the door hinges ] the wires break from flexing. just solder or **** connector them back together. it helps to add some wire to one of the broken ends to make it easier to connect . there may be more than 1 wire broken
You are on the right track.
Door panel is easy to take off. you need a screwdriver and a panel popper (or if you don't have one carefully pull the panel off with your hands, you may have to get new panel clips) ,they are cheap so no big deal.
SOURCE: 1998 Taurus SE warning chime beeps as you get in the driver door
Hi John,
Had a similar problem with my Saturn. Door chime going all the time, the seat belts going up - down - up for no apparent reason.
Turned out to be the switch in the door jamb had become unseated. As it randomly made and broke contact, the cars computer thought the doors were opening and closing, then acted accordingly.
I remounted it with the help of a hot glue gun (plastic mount).
Hope this info helps with your problem.
Best regards
Mike
SOURCE: The driver side door lock wont go all the way up.
The outside door handle spring is broke ,or the latch spring is broke. The only way to tell is remove the door panel and inspect the rod from the handle to latch. Look for broken spring on handle. I have installed an external spring from the handle rod to latch to keep the rod in the full up position.
217 views
Usually answered in minutes!
×