At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have oil leaking into the spark plug chamber will changing the valve cover gasket fix this. I have oil leaking into the spark plug chamber will changing the valve cover gasket fix this.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
p0152 is bank 2 sensor 1 oxygen sensor code...make sure it was plugged back in or sensor may need replacement or you may have damaged the harness. p1564 is for the automatic speed control device basically the same possibilities with this circuit.
Check your pcv valve located on valve cover towards firewall. Pull it out and disconnect and shake it, if u don't hear the valve moving around change it.
Older Nissans have a lot of vacuum line. basically anything that is a small rubber hose that is in the engine bay is a vacuum line. mostly lines that connect to the intake, throttle body, and valve cover. since they sre so numerous I can;t begin ot explain where to start but those are the basics.
sea foam makes an additive for reconditioning seals in the engine(rear main included)....cost about twelve dollars....use according to directions on package...then sell
On the DOHC: The Spark Plug Tube Seals (Washers) on the Valve Cover has developed a leak.
Install new seals.
Remove the Valve Cover to Install the Seals.
If the Valve Cover Gasket have not been replaced recently, go ahead and replace them as well, making sure you clean thoroughly BOTH surfaces before installing any new Seal Washers and Gasket.
Let me me know if this helped, or if you have additional information or questions. Feel Free to contact me on FixYa.com!
ps...I'm replacing (for free!) the Valve Cover Gaskets today on a 1994 Nissan Maxima. Looks like we both will have fun!
If you need the Valve Cover Torque Sequence / Specs let me know on the Comment Section of this Post.
REPLACE VALVE COVER GASKET AND O-RINGS AROUND EACH HOLE INSIDE VALVE COVER TO PREVENT OIL FROM ENTERING. LEAKING FROM SEALS AROUND VALVE COVER TO SPARK PLUG PORT GASKET OR O-RING
I have oil leaking into the spark plug chamber will changing the valve cover gasket fix this.
×