Location of oxygen sensor

Question 1

0helpful

1answer

1986 Dodge w150 318 brakes won't build pressure not leaking fluid what's the problem

Master cylinder might be bad I'd have it checked that is a problem ive had before on my pickup

Jun 04, 2015 • Dodge Cars & Trucks

0helpful

1answer

Where is my oxygen sensor located at on my 1986 dodge d100 with 5.2 liter 318?

Usual place is one above the "catalytic converter" and one below,the upper one would be upstream and of course the lower is downstream.

Mar 19, 2015 • Dodge Cars & Trucks

0helpful

1answer

1990 DODGE W150 5.2L 318 V8 TBI CKP SENSOR WTF

I looked at wiring diagram for your year and engine size, It didn't show a crank sensor. I believe you do have a cam sensor in your distributor. If that is the problem? My info on your model year isn't great.

May 02, 2017 • 1990 Dodge W150

0helpful

1answer

2002 DODGE INTREPID - OXYGEN SENSOR LOCATION

Where is it located which port

Jun 29, 2012 • Dodge Intrepid Cars & Trucks

0helpful

2answers

I have a 1989 RAM w100 with a stock 318. I'm

If you can spray carb cleaner in the carb then you have either a fuel supply problem or fuel delivery problem. Check your fuel pressure and make sure it is in spec. Then check the spray in the carb spray.

May 27, 2011 • 1989 Dodge W150

0helpful

1answer

What is the timing setting on a 1986 dodge w150 318?

set it at 8 degrees

Nov 30, 2010 • 1986 Dodge W150

0helpful

1answer

I have an 86 dodge w150 with a 318 it refuses to start when cold at any temp hellllppppp

Check the timing with a timing lite or machine. You may need to change the timing change Try using hotter plugs.

Nov 03, 2010 • 1986 Dodge W150

0helpful

1answer

Idle stop sensor on my Dodge W150 truck with 318 doesn't seem to be working as it spews black smoke when it is started and then, when it is kicked down, the idle is too high. Idle stop adjustment screw...

O2 sensor and fuel sensor. and check the map sensor.

Aug 31, 2009 • 1990 Dodge W150

2helpful

1answer