I have a 2003 Nissan 350Z, I have a few burned out bulbs in the Instrument cluster, my question is How do I replace these bad burned out bulbs?
You have to remove most of the dash then remove cluster from dash they attach threough rear of board
SOURCE: Help with bulb wattage 2004 nissan 350z
The current draw is going to almost double,from 4.5 amps to 8.3,I wouldn't be so worried of the wiring ,it will handle the increase as I would of the your relays as this is where the increased draw is going to have the most affect.Generally all electrical componenets are designed to handle 33% over what they are rated at,they will work but this will shorten the lifespan of your relays by as much as 50%.
SOURCE: my 1987 nissan 300zx's digital instrument cluster
nissan's have lighting problems on clusters and ac controllers. remove cluster and take it apart, replace bulbs, you can get them from radio shack. its an diy fix, will take about 1 and a half hours and will cost about 10 bucks at most!
SOURCE: Pulsar N13 instrument cluster no TRIP or OD
No he's got wrong, but he's right respectively iun certain situations, but, n13 pulsars dashes (along wth old pintara and skyliones as far as I know) have a little nylon cog inside the fascia that run you odometer that breaks, because of the high demand because a lot of them break you can buy the little cogs off ebay for a couple of dollars and if you wnat to repair it yourself go for it or you can get a professionalto open her up and re install the new one for you
435 views
Usually answered in minutes!
×