Question about 2005 GMC Yukon
2005 GMC YUKON REAR HATCH ACTUATOR will Buzz when locking the door. Does the actuator need to be replaced?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
My wife's 2003 Yukon wouldn't lock the rear doors or hatch, but it would unlock. My problem was the lock relay was bad. There are two relays, one for lock and one for unlock. They are located in the fuse panel on the left side of the console. Open the drivers door and you will see a cover that pops off. Behind this are several fuses and relays. Consult your manual to see which is the lock and unlock relays. They are side by side on a 2003. They pull straight out. I replaced both and they were around $10 apiece at any auto store.
Posted on Aug 01, 2009
The lock is stuck in the "locked" position.
When you close the hatch, it is jamming the latch hook into the wrong area.
Manually open the hatch. Unlock the hatch (even tho the hatch is already open). there are two bolts holding the metal "loop", the loop has moved. Adjust the metal loop and close the hatch / lock it, etc.
Posted on Sep 28, 2009
Harris, did you find a solution to your problem? I am having the same issue on my 04 denali. Rear doors and tailgate wont lock but the unlock fine. Front door function normally? let me know.
Posted on Nov 18, 2009
Could be the latch mechanism for the door is sticking. You could try using some white grease on the latch and the contact where the latch hooks to. You can purchase the grease from most auto parts stores. You will not need to use alot. Just apply a small amount to the mechanisim and then work it in using the manual handle. Then open and close the door several times to feel the "action". Then apply a little more and repeat. This should loosen the latch and get it working again. Also make sure that none of the tension springs have come loose on the latch. And check the seal around the door and make sure it is not pinched and has a proper fit.
Posted on Dec 29, 2009
Tips for a great answer:
Feb 23, 2013 | 2005 GMC Yukon Denali
Sep 09, 2011 | 2005 GMC Yukon
Apr 20, 2010 | 2006 GMC Yukon Xl Denali
Apr 18, 2010 | GMC Yukon Denali Cars & Trucks
Mar 03, 2010 | 2003 GMC Yukon
Feb 08, 2010 | 2005 GMC Envoy
Sep 28, 2009 | 2005 GMC Yukon
Nov 18, 2008 | 2006 GMC Yukon
Oct 12, 2008 | 2006 GMC Yukon Xl Denali
1,098 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: