2002 Subaru Legacy Logo

Related Topics:

A
Anonymous Posted on Aug 25, 2012

Subaru engine code p0453

Check engine light keeps coming on with a code p0453 in my 2002 subaru legacy what does it mean

4 Related Answers

5LTRBTR

Kevin Blair

  • 196 Answers
  • Posted on Dec 18, 2008

SOURCE: how to retreive a check engine light from a 1991 subaru

read the info in the link it has a step by step http://legacycentral.org/library/literature/codes.htm

Ad

Anonymous

  • 3 Answers
  • Posted on Jan 27, 2009

SOURCE: common fault codes for subaru legacy

replace the coolant temperature sensor (2 pins)... im not sure but i think is brown...

Anonymous

  • 1 Answer
  • Posted on Apr 24, 2009

SOURCE: 1992 Subaru Legacy Check Engine Light

There is two Green single wire plugs under the dash, driver side, above your left leg (rh drive) plug them together, engine check light will flash, www.auto-diagnostic-codes.com will help to read codes

mx5turbo92

mx5turbo92

  • 545 Answers
  • Posted on Jun 04, 2009

SOURCE: i have a subaru legacy outback, abs light comes on

one of your abs sensor is bad or the abs motor,go to local shop to diagnose which sensor,shop usually charge $ 60 to diagnose abs system,good luck, let me know ..

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2005 subaru legacy has code p010, no probs with engine performance?

fix that problem cause it will cause problem and damage the catalytic converter
0helpful
1answer

My code is 3 short check engine light flashes 91 subaru legacy

No idea here no experiance but try asking at the dealers as it could be something simple like a oxygen sensor failure as these older cars are not electronicly loaded
0helpful
1answer

After changing oil on 1997 Subaru Legacy I started the car and it ran about 5 seconds and shut off and AT oil temp light and check engine light came on. This is my first Subaru and this is the 4th oil...

will it restart ? can you check the computer for trouble codes ?
The check engine light would come on just as the engine dies under normal conditions.
0helpful
1answer

RE: 1996 Subaru legacy L My check engine light has been on for years! Now I need to be able to pass NYS inspection and don't know what the codes mean that were pulled by a mechanic..1 & 2...

There is a problem if you leave a check engine light on to long there is what techs call. Check light burn in the code get burn in to momery. first have a code check due fix the basic line problem if you have done that you will need a new computer ECM
.
2helpful
1answer

How do I reset the ''check engine'' light on my 1997 Subaru Legacy Outback wagon?

the check engine light comes on if there is a problem with thecomputer system related to the emmision, when this is is repaired the light on can only be turned off with a monitor,code reader. some of these are quite inexpensive.over the web or at a part store.
0helpful
1answer

How do get codes for 2001 outback? Is

Hi,
I'm not sure if you're asking how to obtain the codes, or what the codes mean...
I hope this link is of assistance to you.

http://www.engine-light-help.com/subaru-check-engine-light.html
2helpful
1answer

The check engine light keeps coming on and flashing and then goes off on my 93 subaru legacy ive changed the oil sparkplugs air filter everything and it still comes on and also my seat belt light flashes...

hi..

well first of all it means that u have a problem some where on the suv the only way to find the problem is to hook a diagnostic computer and see what the code is u will have to take the car to a shop who works on isuzu and im sure they can tell u what code it is and whats wrong or u can take the suv to advance auto parts and they can hook there machine to it for free and tell u the code good luck

OK, the best action now would be to scan the ecu for any trouble codes that may be stored at this point with a diagnostic computer. this action will describe the issue concerning the check engine light and, it will also direct you to the location of the failed sensor that may be damaged at this time.

In most cases, this light will illuminate if a vital sensor has failed to register a signal for a short time or, if the sensor circuit is open.

thank u
rate me!!
2helpful
1answer

Common fault codes for subaru legacy

replace the coolant temperature sensor (2 pins)... im not sure but i think is brown...
0helpful
1answer

Check engine light

it is possible but regardless they need to fix.
get that in writing in case something happens to engine they cant say you drove around with light on so no warranty
Not finding what you are looking for?

232 views

Ask a Question

Usually answered in minutes!

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...