SOURCE: rough idle stalls at low rpm's
hello first check your idle with the car running foot on brake see were your rpm reading is if your below 500rpm check your label underhood for your curb idle setting second see if theres a adjustment screw you can increase were your gas cable lever rest against your set screw underhood if you feel confident enough remove your iac motor idle air control valve if the bore were the end of the pintle extracts out to close has varnish builup our carbon it will stick creating vacuum leak type senario causing stalling rough idle sometimes even no start conditions good luck
SOURCE: 2001 Nissan Maxima- runs rough, stalls when idle
Timing belt could have skipped a tooth.
Horrible vacuum leak could have started. Listen for suction noises when you raise the hood.
Someone could have poured sugar in your tank.
You could have put diesel in your tank instead of gas.
Could be a bad MAP sensor, TPS sensor, etc.
Need more details to be precise.
SOURCE: rough idle stalls at low rpm's
check your transmission fluid,the motor will stall when fluid is low
SOURCE: mazda rx8 rough idle and stalls when at operating
If there are no vacuum leaks, change idle control sensor.
330 views
Usually answered in minutes!
×