My 2003 Buick Lesabre Custom just had the Transmission changed but Now my car wont crank. The starter was hit at first and it drove fine, went into reverse and then drive. When we parked the car it will not read in anything else but drive so now the car wont crank. Is it the computer If so what could fix it without having to go back to a mechanic?
Here's the link and I'm sure you will get the solution of your problem
2003 Buick
SOURCE: Trasmission seems stuck in park
Did you chk. to see if you got an ajustment on cable, wear it hooks to trans. or maybe cable came out of bracket that holds it.
SOURCE: broken steering collumn 95 buick lesabre
Okay well here is your most likely problem,the nuetral safety switch it's located on the transaxle(transmission where the shift linkage comes in)you can test this to make sure its working but it will require conituity tester,a parts store might also test it for free,this is a $100+ dollar switch,so if needs to be replaced check with the local salvage yards to see if you can get one used.
SOURCE: 1995 Buick Lesabre: security blinks and car will not start
If the starter is turning the engine, try re-setting the security system (leave key on till light stops blinking.) If the starter does not turn, you may have some success in re-setting system, if not you need to check battery voltage and voltages in starter system till you find the problem...can be something as simple as a bad connection at the battery. If you need help with further testing, just ask.
SOURCE: my 1995 buick lesabre check engine light is on
Take it to a real mechanic, not the phoney physics at the zone. The speed sensor will not respond if the car is not moving. May be an air flow sensor. They will go bad if it has ever been wet. They can be checked with a scan tool.
SOURCE: My auto trans makes a thud when shifting out of
Its the motor mount under compressor! It goes about every ten years too much torque
335 views
Usually answered in minutes!
×