I need to replace the serpentine belt on my V6, 3 liter 1991 Plymouth voayer. Bout I do nothavethe routing diagram
I did not find a single page for a belt diagram but this link should bring up belt diagrams for your vehicle. It is up to you to find the one that matches your engine setup.
Http://www.2carpros.com/diagrams/plymouth/voyager/1991 Here are the diagrams.
SOURCE: i NEED 2005 mazda6 Serpentine Belt Routing
There are 2 engines for your Mazda 6, a 2.3 and a 3.0. Below are both diagrams:
2.3
3.0
SOURCE: serpentine belt replacement
2.0L Engines
See Figures 11, 12 and 13
The
accessory drive belt for 2.0L engines has no provision for manual belt
adjustment, since these engines use an automatic belt tensioner. Drive
belt slack is taken up by the automatic tensioner.
Movement of
the automatic tensioner assembly during engine operation is not a sign
of a malfunctioning tensioner. This movement is the tensioner
self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
SOURCE: need routing diagram for 2000 lincoln town car serpentine belt
There's a diagram at this link.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
SOURCE: i need a serpentine belt assembly guide or diagram for a 2006 3.5 liter v6 chevrolet impala
Diagram 9-5 on this page:
http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf
925 views
Usually answered in minutes!
×