At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you checked the pin switchs at the doors ? This function does run thru the BCM but is not a common failure so I cannot rule out a defective in the BCM
The brake light switch is not installed or adjusted properly, the shift interlock cable gets energized by a circuit through the brake lamp switch. This allows the shifter to be moved from park.
If both of your brake lights are out including the third light above the rear door you should check 1: brake switch located behind brake pedal. 2: relays under hood although not a likely problem. 3: trailer wiring if there is any. Most likely it will be the first though as it controls all brake lights.
Caliper mounting bracket bolts 125 ft, Caliper guide pins/bolts 26 ft, Brake hose to caliper 35 ft. Wheel lug nuts 100 ft. Wheel speed sensor 115in lbs*** This is for disc rear brakes Teves system. You do know that the rear disc is a Rotor/Drum. The parking brake shoes ride on the inside.
you need to lay on your back and follow the brake pedal up so far and you will see the brake switch attached to it,you will need to pull out a large hair pin clip,and wiggle the master cylinder rod and the switch off together,
what is your question ?
×