Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Aug 11, 2012

How to adjust side mirrors of isuzu rodeo - 2002 Isuzu Rodeo

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Sep 12, 2008

SOURCE: 1994 isuzu holden rodeo injection timing adjustment

try u-pull our patrs

Ad

Anonymous

  • 3 Answers
  • Posted on Jan 10, 2009

SOURCE: power windows isuzu rodeo 1999

Cable must of disconnected need to take door cover off and reconnect...

Anonymous

  • 3533 Answers
  • Posted on Mar 21, 2009

SOURCE: clutch adjustment on a 1995 isuzu rodeo

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Anonymous

  • 1489 Answers
  • Posted on Apr 23, 2009

SOURCE: Driver side mirror is loose and want stay in place, how do you tighten it?

You'll have to remove the door panel to access the screws which hold it on.

Anonymous

  • 1 Answer
  • Posted on Apr 23, 2012

SOURCE: 2001 isuzu rodeo driver side window is stuck down?

I just figured out one solution that worked for me today. Pull the switch panel from the door unscrew retainer clips from both ends. Remove switches from panel HOLDING PANEL LEVEL (many small parts can move or fall if not LEVEL) The driver plastic switch button is unlike the other windows. The side of the button for the up position has a plastic tab the other do not. Cut the plastic tab, make sure other small switch plates are in position and while level, place the plastic buttons back on to the switch plate. Turn car on and test before installing back into door panel.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Isuzu rodeo drivers mirror goes out auto but goes to far it wont stop where it is suppose to please help

its busted, my guess, worn out.
get a new mirror.
but first check fuses. on all electric fails.
0helpful
1answer

2000 Isuzu Rodeo side mirror problems

A feed wire must be backfeeding into both control circuit wires.
1helpful
1answer

The brakeline busted and cannot get drum off 2001 rodeo sport

on the backside of drum there should be a couple of slots. take a mirror and flashlight to look inside. you will need a couple of flat head screw drivers will be fine. adjust the brakes in to back them off of the drum itself. you may have to take a hammer and smack the corner of it to take ff.
0helpful
1answer

Where can i get a self adjuster rod for a 1998 isuzu rodeo back brake?

You should be able to get one at any auto parts store, just tell them which side of the car because one is reverse threaded. hope this helps.
0helpful
1answer

54 plate isuzu rodeo, when jump started electric windows driver side will not work, in the past i have unplugged unit from drivers door , left it 30mins, plugged it back in and they work. now this does...

Could be and is likely to be the fuses this time :o/

If fuses are ok try a full system reset by disconnecting to + terminal off the battery, momentarily hold the terminal to the bold to diffuse all control units, leave disconnected for 10 minutes then reconnect & try them then.

Regards

Lloyd
1helpful
1answer

I need instructions for replacing a passenger side view mirror on a 1997 Isuzu Rodeo

Side Mirrors - Power Mirror
Removal & Installation
  1. Disconnect the negative battery cable.
  2. Remove the door mirror cover (3).
  3. Remove the three bolts and disconnect the connector (2), then remove the mirror assembly (1).
  4. Installation is the reverse of the removal procedure.

    0047d6d.jpg
    Fig. View of the power mirror (1), connector (2) and cover (3)

Hope this helps.
0helpful
1answer

Do i have to remove intake manifole to adjust tappets 1995 isuzu 3.2 rodeo? passenger side.

I dont believe they are adjustable. Change the oil and use a 5w30 Mobil 1. Sludge will make them stick.
2helpful
1answer

Driver side mirror is loose and want stay in place, how do you tighten it?

You'll have to remove the door panel to access the screws which hold it on.
2helpful
1answer

Dirver side mirror broke today

ok first you need to pull the little trianglle off the back of the mirror on the INSIDE of the door
when you do this you will see 3 bolts...remove the bolts and unclip the harness...you can go to a junkjard and get a new mirror cheaply and installation is reverse of removal
Not finding what you are looking for?

302 views

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...