Changed fan clucth,thermostat,water pump and ti still runs hot
Is there a restriction in the exhaust system ?
How about a restriction in the air flow thru the radiator ?
How long can you drive it before it overheats, and does it boil over ?
SOURCE: I have a 1996 Mazda 626 2.0 Automatic. It runs
of course the top is hot water goes into the rad from the top and out of the bottom into the engine, the fact that the belt broke makes me wonder about the integrity of the water pump, the impeller might be slipping, could still be the rad , does the heat go from the top to the bottom???
SOURCE: losing watger
you could also have a cracked or pitted head letting water into your cylinders .check to see if you are blowing water out of your exhaust if you rev slighty.this happenes if you do not use coolrant .straight water is not a good idea with aluminium heads,can cause corrosion
SOURCE: My 1991 mazda 929s is running hot and water is
It sounds like to me that you have a blown head gasket. Possibly even a warped head.
SOURCE: 2001 mazda running hot, changed water pump,
Yes it could. Not turning fast enough will create an overheating problem. Also let it go long enough it could break and take out the radiator.
233 views
Usually answered in minutes!
×