2006 subaru B9 Tribeca Error 66

ALL ELSE WORKS
CAR DRIVES?, HEATER AND A/C WORKS OK?

this may be of help if you do not have the manual with the legend.

Interior Fuse Box Location 2006 2014 Subaru B9 Tribeca 2006 Subaru B9...

Subaru P0700 Transmission Control System Malfunction

Subaru P0768 Shift Solenoid D Electrical

Check for peep hole on bell housing flywheel has marks stamped on it when on TDC.

Misfire can create a lot of heat. Especially in the catalytic converter. usually a crank sensor results in no start but it affects the ignition timing. What are the exact codes?

Diagram reference number 1 in the image below:
"" Fitment: 2006 SUBARU B9 TRIBECA - 4 door

Application Notes:

Category: Electrical. Charging and Starting

SubCategory: Alternator / Generator and Related Components

Position: General

Part Number: 809221090


This is a Serpentine Belt that fits the 2006 SUBARU B9 TRIBECA - 4 door with the EZ30D engine. The Serpentine Belt is designed by SUBARU to be part of the Electrical. Charging and Starting-Alternator / Generator and Related Components. The Serpentine Belt has a position on the vehicle of General. The 2006 SUBARU B9 TRIBECA Serpentine Belt is a factory made SUBARU OEM part and it comes with a 12 month 12.000 mile warranty (parts only). Do not be fooled by an aftermarket SUBARU B9 TRIBECA Serpentine Belt! Buy a factory SUBARU part and receive peace of mind!
This factory part has a part number of 809221090. "

Get this manual online at www.reliable-store.com and get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs, error codes,
everything.

these people had the same issue:
er bb or er 66 error message on 2006 Tribeca B9 SB9T com

http://www.elightbulbs.com/2006-Subaru-B9-Tribeca-Replacement-Light-Bulbs under car at fog light unscrew cap pull bulb out do not touch new bulb hold at bottom put back in same way

Hello, I know exactly what your talking about! and why no one else did... The error code is being displayed on your trip/odo LCD screen at the bottom of your right gauge pod if I remember correctly. Only, it\'s not Er 66... it\'s (Er bb) which is a malfunction with your vacuum pump system. I truly hope this is the same concern you are asking about, if so I am happy I could help. If it is a different problem please let me know so I can look into this matter further. I\'ve added an "error chart guide" so you will have proof this time when/if you decide to return to the dealer... Good luck!! and I hope this info helps...(subytech1)...