Turn signals and brake lights not working... Checked fuses, all good. Running lights, tail lights, and hazards work fine, even third brakelight on the cab works.... Could it be the switch or flasher relay?
SOURCE: 1998 Dodge 2500 pickup turn signals, hazards
There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you
SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards
I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!
SOURCE: hazard lights work, but no turn signals not even
The problem is the multi-function switch.This takes the place of the turn signal switch.It is in the steering column.Hope this helps.Good luck.
627 views
Usually answered in minutes!
×