If they only replace the crank sensor the timing belt will be removed along with the other belts on the front of the engine so if any of the belts are worn it is a good time to replace them. With a $1275 estimate I suspect that other work is to be performed at the same time though.
The sensor list price is $80 and the time required to replace is 3.0 hours so at $100 per hour labor and 1 hour to diagnose it the charge should be $480 plus shop fees and taxes.
SOURCE: My mechanic is having trouble locating the
hi,
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.
SOURCE: diagonastic test said crankshaft sensor needs replaced where is it on the car?
This is the picture from their website. On my 2002 it was located where they are calling "A".
SOURCE: HOW DO YOU REPLACE A
The sensor should be mounted with 2 screws. The location should be between the airfilter box and the engine or the otherside of the engine where the belts are located, and would be near the timing cover.
To help locate it, it will look like this;
SOURCE: its a hyundai trajet,aa said crankshaft sensor not
it is inside the timing cover in most cases with hyundai the timing belt will have to be removed so the crank gear can come off the sensor is usually behind the gear especially if it is a 6cyl if it is a 4 cyl then the wire goes behind the timing belt make sure the timing marks are lined up so when you reassemble it is lined up
Testimonial: "Thank you for the advices Ill get cracking on it"
SOURCE: 2004 Hyundai Santa Fe 3.5L V6 What all do I
Removal & Installation
To install:
Crankshaft Position Sensor
The crankshaft position sensor is located at the front of the engine near the timing belt.
7,080 views
Usually answered in minutes!
×