I recently bought a 84 benz 190e but for some reason the turn signals and horn arent working and im not sure why. iv replaced the fuses that were burn but still nothing. maybe i didnt change the fuse for that specific problems im not sure but its weird because my hazard lights still work. just not the blinkers. can someone help me please?
See if this link helps.
Turn signals not working in my 1984 mercedes benz 190E Google Search
SOURCE: Car fuse problem
Fuse problems are the cause of many strange problems with your car, here are a few fuse problem solutions.
If you are suffering from No power to radio, cigarette lighter, here is your solution, another FixYa solution about power problems, that will prove helpful is here.
For Remote control or key fob problems this solution should do the trick.
For dash light illuminating this solution might give you a clue.
Fuse problems - can be replaced by you quickly, easily, and with little to no dirty hands, & most important of all can save you money. Good luck with your fuse problems, hope this thread helped you, if you find new, or better solutions please post them here.
The car fuse box is usually found in one of two places: usually near the bottom of your dashboard as you move closer to the foot well or, on some models, under the hood. If you are having trouble finding the car fuse box, have a look at your car manual.
Good luck.
SOURCE: 1985 Mercedes Benz 190E, No air cool or hot, just quit!
Check your Klima relay ,located behind the battery next to the ABS and Engine ECU ,sounds like the a/c compressor is not turning on
SOURCE: My turn signals/hazard lights aren't working, fuse--Chevy Tahoe
look for your short somewhere in the wiring harness.
SOURCE: 1979 Mercedes Benz 300D- Turn signals, windows, radio...quit
Barrel fuses used to be made of aluminum and corrode on the copper contacts. Pull fuses and replace. 10-15 dollars now will help get rid of electrical gremlins.
SOURCE: 1998 Dodge 2500 pickup turn signals, hazards
There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you
137 views
Usually answered in minutes!
×