93 unleaded or 95 unleaded, Renault Clio 1.4 16v 2001
If you have a old car I would use the 93 newer car 95
SOURCE: renault clio 1.2 petrol engine
If the timing belt has snapped then you will have caused major internal engine damage. Its not just a case of replacing the belt as its likely the pistons will have made contact with the valves and bent them in the process. You will need a qoute from a garage for the repair and potentially you are looking in excess of £1000. The only alternative to this is to source a suitable engine for exchange from a breakers.
SOURCE: can you tell me the cam timing for mk 1 renault
the cambelt timing marks for clio 1.4 are = the crankshaft cog alignes withmark at 6 o/clock position at TDC No 1 cyl and the cam cog alignes with mark on cyl head at rear of cog at 12 o/clock position belt is fitted anti clockwise from crank then w/pump and then cam cog hope this helps ?
SOURCE: Hi i have just had my car Renault Clio on a 06
- By dancer23 on Feb 18, 2010 -
Earlier i posted a question requesting how to switch off the service light on my Renault Clio, i have found an answer to thios, as follows.
How do you reset the service indicator light 2007 renault clio?
Turn on the ignition, but don't start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows 'Service Due' press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.
Turn on the ignition, but don't start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows 'Service Due' press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.
all of the above is correct apart from pressing the toggle button. if you instead press the bottom toggle button for 10 seconds the display will start to flash. Keep button depressed and 5 seconds later the service counter will reset.
I know this works as i have just done it myself,
I hope this will help many others .
81 views
Usually answered in minutes!
×