Location of the fan relay switch in 2000 Volkswagen Beetle

SOURCE: location of relays in 2001 vw beetle

OPEN L/S DOOR , PULL END CAP OFF DASH , FUSE BOX LOCATED THERE W/ SOME RELAYS & REST ARE UNDER L/S OF DASH OR UNDER HOOD

SOURCE: fuse number/location for air conditioning compressor 2000 beetle

View the attached website to see if your problem is in the fuse block that is under the hood immediately on top of the car's battery.


http://www.aircondition.com/tech/questions/83/No-Compressor-Operation-in-Volkswagen-New-Beetle

Also, the car's blower motor/climate control is controlled by the 25 amp fuse No. 25 in the fuse block located at the end of your dashboard.

SOURCE: 2000 volkswagen power window won't go up

the problem is the window clips that connect window to regulator, it is a very common problem and there is a factory recall for the clips that fail. return to your local realership and they will rebuild both doors regulators with upgraded clips

SOURCE: volkswagon beetle CD player broken

The cd player has to be replaced.
There is an internal failure to the unit.
The dealer has to change it out or get another cd player for the car.

SOURCE: Loacation and replacing dust @ pollen filter, 2000 vw beetle

Dust and pollen filter, removing and installing
The filter is located in the right rear of the instrument panel under a cover.

Components of dust and pollen filter:




1 - Frame 3 - Filter element 4 - Plastic nut, 2.5 Nm (20 in lb ) 5 - Filter housing with seal Removing

• Push center cover -1- forward -arrow A- and lift up to remove.

• Remove screws -arrows-.
• Lift right plenum panel cover -1- and remove from clips at front and rear edge.
• Pull cover -1- toward center of vehicle and out of retainer in A-pillar to remove.

• Remove screws -arrows- and remove right closeout panel -1-.

• Remove rubber grommet -1-.
• Press tabs of filter housing in direction of -arrow-.
• Remove filter element with frame in upward direction -arrow A-.

• Guide frame -1- into first slot on left and right sides of new filter element.
• Press frame with filter into housing -2- and engage retainers.